Setup troubleshooting
This page lists the messages the setup can show while it downloads the trial or installs content packs from your files, with what to do. Each heading is the message as the add-on shows it. In every case below, content you already installed keeps working.
For the normal steps, see Installation. If nothing here helps, press Contact support in the setup window or the sidebar: it opens an email to our support address with the add-on and Blender version, the error and the pack already filled in, and copies the same details to the clipboard for webmail.
Installing from files
These are about the full version and other packs you install from .hgpack files, see Installation › Install the full version.
Not a content pack
The file list shows Not a content pack next to a file that is not a Human Generator pack, and leaves it out. Human Generator packs are .hgpack files. If the file is one and still shows this, your browser probably unzipped the download and it was zipped again by hand; see Invalid File Structure Error.
Older than installed
The file is an older version of a pack than the one in your content folder, so it is left out. Nothing needs doing. If you picked it by mistake, download the current file from your purchase.
This add-on needs 4.1 or newer
Base Humans is an older file than this add-on needs. Download the current one from your purchase.
The file is a version of the pack from before this version of the add-on. It still installs, but the add-on then asks for an update. Download the current pack from your purchase and select that one.
Base Humans isn't among these files
Base Humans isn't among these files. Humans can't be made without it.
Every human needs the Base Humans pack. Download it from your purchase too and add it with Select more files…. When you come from the trial the message is The trial content stays until it is installed.: the other packs install, and the trial is replaced once Base Humans is in.
Install failed
Install failed Packs that finished stay installed. Your files are not changed.
The reason is shown above it, with the name of the pack. Most often it is Can't write to the content folder or Not enough space. A file that got damaged on the way shows This file is not a Human Generator content pack.: download it again. Then press Retry; packs that finished are not installed again.
An install is running
An install is running. Wait until it is done.
You selected or dropped files while packs are being installed. Add them when it is done.
Connection
Can't reach humgen3d.com
Can't reach humgen3d.com. Check your internet connection and try again. Your installed content works as usual.
During a download the message is Can't reach the download server. Check that this computer is online, then press Try again or Retry. On a company network, a firewall may block the add-on: ask your IT department to allow the hosts below. The full version doesn't need a connection: it installs from files, see Installation › Install the full version.
humgen3d.com took too long to answer
humgen3d.com took too long to answer. Try again in a minute.
During a download: The download server stopped answering. Try again in a minute. A slow or busy connection can cause this.
A secure connection to humgen3d.com couldn't be made
A secure connection to humgen3d.com couldn't be made. A proxy or security software may be intercepting it.
Some company networks and some antivirus programs open secure connections to inspect them. Blender doesn't trust the certificate they put in between, so the connection fails. Ask your IT department to allow the hosts below without inspection, or turn off the web protection of your antivirus while you download. A different network, such as a phone hotspot, also works.
Your network's proxy asks for a login
Your network's proxy asks for a login. Sign in to it, or ask your IT department to allow humgen3d.com.
Your network sends traffic through a proxy that needs a login, which Blender can't give. Ask your IT department to allow the hosts below.
humgen3d.com is having a problem right now
humgen3d.com is having a problem right now. Try again in a few minutes.
The problem is on our side. Try again in a few minutes.
The download server sent a web page instead of the file
The download server sent a web page instead of the file. If your network needs a sign-in page, sign in and try again.
Hotel, train and guest networks often show a sign-in page first. Open any website in your browser, sign in to the network, then press Retry. The part that was already downloaded is kept.
humgen3d.com gave an unexpected answer
The setup shows humgen3d.com gave an unexpected answer. Try again later, or contact followed by our support address.
Try again later. If it keeps happening, write to support.
Too many downloads from this network
Too many downloads from this network. Try again in an hour.
The trial download stops for an hour after many requests from one network. This counts every computer on the network, so in a studio or school a colleague's downloads count too.
Downloads are paused right now
Downloads are paused right now. Try again later.
We switched the trial download off for a while, for example during maintenance. The setup may show a message from us with more details instead. Try again later. Installing packs from files works regardless.
Hosts to allow
For firewalls, proxies and security software, the setup connects to these hosts over HTTPS (port 443):
humgen3d.com*.r2.cloudflarestorage.comdownloads.humangenerator3d.com
Download and disk
Not enough space
Not enough space: 3.2 GB needed, 1.8 GB free
The numbers show what the selected packs need once unpacked, and what is free on the disk of the content folder. Free some space, untick packs you don't need (such as 8K Textures), or press Change… next to Content folder and pick a folder on another disk.
When the setup shows Couldn't check the free space on this disk, which happens on some network drives, it still installs. Make sure there is enough room.
Can't write to the content folder
Can't write to the content folder. Check the free space and the folder's permissions.
The disk is full, or you don't have permission to write to the folder. On a shared studio folder, ask whoever manages it, or pick a folder of your own with Change….
That drive isn't connected
That drive isn't connected. Connect it, or choose another folder.
The content folder is on a drive that isn't there. Connect it, or press Change… and pick another folder. See also Can't find your content folder.
Another Blender window is downloading the content
Another Blender window is downloading the content.
For an install from files the message is Another Blender window is installing content. Only one Blender can install into a content folder at a time. Wait until the other window is done, or close it. If that Blender crashed, the setup goes on by itself after 10 minutes.
Connection lost. Trying again in 10 s
When the connection drops, the setup tries again by itself three times, each time from where it stopped. You don't need to do anything.
Download failed
Download failed Packs that finished stay installed, and the download resumes where it stopped.
The reason is shown above. Fix it with the sections on this page, then press Retry. Packs that finished are not downloaded again.
The downloaded file is damaged
The downloaded file is damaged. Try again.
The file didn't arrive complete. Press Retry.
Download paused
Pause in the setup stops the download and keeps what it fetched. Download paused then shows how much is done, with Resume to go on and Discard download to throw the partial files away.
If you close Blender during a download, start it again from the HumGen tab (Set up Human Generator, or the update button) and press Install. The download continues from the part that was already fetched.
A newer Human Generator is needed for the latest content
A newer Human Generator is needed for the latest content.
The newest content packs need a newer version of the add-on. Update the add-on in Blender's extension list (Edit > Preferences > Get Extensions), then update the packs.
A pack can't be downloaded
When the server won't hand out the trial pack, Download failed gives the reason, for example Trial Content: This pack can't be downloaded right now. Try again later.
This pack comes with the full version. Install it from the files of your purchase. means the pack is not part of the trial. See Installation › Install the full version.
The setup window
The setup window doesn't show
The setup is a window inside the 3D viewport. If it doesn't show, press N in the 3D viewport and open the HumGen tab. The Setup panel has Continue setup, and Pop-up not showing? Set up in this panel, which shows the same steps as plain buttons in the sidebar.
This viewport is too small for the setup
This viewport is too small for the setup. Make it larger, or go on in the sidebar.
Make the 3D viewport larger, for example with Ctrl Space, or press Continue in the sidebar.
Downloading needs Blender's online access, which is turned off
Downloading needs Blender's online access, which is turned off.
Blender 4.2 and later has an Allow Online Access setting, and the setup needs it to download the trial. Press Allow online access in the setup, the HumGen tab or the add-on preferences. The setting is also under Edit > Preferences > System > Network.
Turning online access off also stops the daily check for updates. The full version installs from files and needs no connection. Our privacy policy says what the add-on sends.
Blender was started in offline mode
Blender was started in offline mode. Start it normally to download content.
Blender was started with --offline-mode, which can't be changed while it runs. Start Blender without that option.
Could not load the pack list
The setup couldn't get the list of packs from humgen3d.com. The reason follows the message; see the Connection sections above. Press Try again when it is fixed.
No Human Generator content in this folder
You picked a folder with Use this folder or Select folder that has no Human Generator content packs in it. Pick the folder that has the content_packs folder inside, or install the content with the setup.
Content from an earlier install
If you used Human Generator 4 before, you don't install the content again.
- Your content is found automatically. The setup looks in the folder of your preferences, the folder an earlier version remembered, the preferences of the older add-on and the default folder. When it finds content, its first screen shows Found Human Generator content in with the folder. Press Use this folder.
- If it isn't found, press Select folder next to I already have the content installed on that screen, and pick the folder with your packs.
Can't find your content folder
Can't find your content folder If it's on an external or network drive, connect it and press Try again.
The content folder is set but not there, for example on an unplugged drive or a folder you renamed. Nothing is created or installed while it is missing.
- Try again looks again, after you connect the drive.
- Locate folder… lets you pick the folder in its new place.
- Install again… opens the setup to install the content into a new folder.
To move the content on purpose, move the folder in your file manager, then press Locate folder…. Blend files you saved before the move may still look for textures in the old place; Blender's File > External Data > Find Missing Files fixes those.
Human Generator is installed twice
Human Generator is installed twice. The older copy in your add-ons folder is still switched on.
You installed the new version next to an older Human Generator in your add-ons folder. Two copies can't run at once. Press Use the new version: it takes over the content folder and settings of the older copy and switches that copy off. If Blender asks you to restart, do so.